Herd Water Needs
Enter your livestock numbers to calculate daily water demand and the minimum flow rate your pipe must deliver.
Select your livestock types and enter the number of each animal. Adjust litres/day if your animals drink more or less.
Select the capacity of your storage tank.
How far animals walk to reach the trough.
How many animals can fit at the trough? Allow ~30 cm per animal.
How many hours per day animals are on pasture. Used to calculate the minimum daily flow rate.
Pumping System
Use this when water needs to be pumped uphill or over a long distance. Fill in your pipeline details to find the right pipe size and pump power.
Full length from pump to trough. 5% is added automatically for fittings.
Pump to trough height difference. Enter 0 if on flat ground.
Your pipe's pressure rating. Use 100 PSI for plastic pipe in cold climates.
Pressure needed to close the trough's float valve. Usually 5 to 20 PSI.
See how different pipe sizes affect system pressure. Lower is better.
Gravity System
Use this when your storage tank sits on a hill above the trough. The calculator checks if your elevation drop creates enough pressure to push water through the pipe.
Full length of pipe from the tank to the trough.
How many metres lower the trough is compared to the tank outlet.
See how different pipe sizes affect residual pressure. Higher is better.
About This Tool
The Livestock Water System Planner helps estimate herd water needs and plan a pasture watering system. Enter your livestock numbers and site details to calculate flow requirements and compare system options.
- Step 1: Enter your livestock numbers to calculate daily water demand and peak use.
- Step 2: Choose a pumping or gravity system based on your site.
- Step 3: Review pipe size, pressure, and pump or gravity performance.
As a rule of thumb, each metre of elevation provides about 1.4 PSI. If gravity does not provide enough pressure at the trough, a pump may be required.